---+ Polyacrylamide Gel Electrophoresis Our gel rigs and supplies are from [[http://www.cbsscientific.com/][CBS Scientific]]. The [[http://www.nationaldiagnostics.com/articles.php/tPath/1_3][National Diagnostics Website]] has very helpful background on RNA/DNA polyacrylamide gels. ---++ Pouring the Gel For denaturing urea gels, we use the [[http://www.nationaldiagnostics.com/images/ec833_protocol.pdf][SequaGel system]]. Check out the link to determine how to mix up a gel of the proper percentage. | *Spacer Width* | *Gel Height* | *Gel Width* | *Gel Vol* | *TEMED Vol* | *10% APS Vol* | | 1 mm | 28 cm | 16.5 cm | 50 ml | 20 µl | 400 µl | | 1 mm | 14.5 cm | 16.5 cm | 25 ml | 10 µl | 200 µl | TEMED is N,N,N',N'-tetramethylethylenediamine. APS is ammonium persulfate. Together, they create the radicals to initiate polymerization of the gel. TEMED and 10% APS should be stored at 4°C. APS solutions should be freshly prepared for best results. %RED%Acrylamide is a neurotoxin before it is polymerized.%ENDCOLOR% You are working with it in a liquid solution where spills may happen. Wear gloves, a lab coat, and safety glasses when working with polyacrylamide gels. ---++ Loading the Gel Formamide sample loading buffer. Be sure to wash urea out of the wells using a syringe before loading the gel. | *Spacer Width* | *Gel Width* | *Well Height* | *Well Width* | *# Wells in Comb* | *Max Sample Vol* | | 1 mm | 16.5 cm | 15 mm | 8 mm | 12 | 120 µl | | 1 mm | 16.5 cm | 15 mm | 4 mm | 20 | 60 µl | | 1 mm | 16.5 cm | 15 mm| 2 mm | 30 | 30 µl | For sharp bands, you should load to much less than the maximum well volume. ---++ Running the Gel Generally denaturing polyacrylamide gels are run at a constant electrical power (Watts). This maintains a certain heated gel temperature during the run. For the 16.5 cm width gels, use 25 W.
This topic: Lab
>
WebHome
>
ProtocolList
>
ProceduresPolyacrylamideGelElectrophoresis
Topic revision: r2 - 2012-02-18 - JeffreyBarrick