Difference: FreezerFailure (1 vs. 2)

MBB Freezer Failure

There is a backup -80 located in MBB room 1.138. If we need to move our items to this freezer follow the procedure outlined below:

1. Affix a label to the outside of the freezer stating which shelf(ves) you are using.
2. Label your materials.
3. Be aware that as the door will be opened continually it will go into alarm, which will be received by the alarm monitoring shop.
4. Please call them BEFORE you start the transfer of materials at 471.3935 to warn them that they needn't therefore call Rob (building manager) at 2.00 in the morning.

Welch Freezer Failure

Preventive maintenance

Try to minimize the amount of time that the freezer door is open; if necessary, remove the rack or box from freezer, close door, find your stuff, and return rack/box to freezer.

Maintenance checklist

To clean lid gasket use a soft cloth to remove any frost build-up from the gasket, sub-lids and lids. Replace and clean lids. To clean lids use warm water to remove ice and allow to dry.

To clean air filter and/or condenser use a vacuum to remove any dust from the filter/condenser fins. Use care not to damage the condenser fins.

MBB Freezer Failure

There is a backup -80 located in MBB room 1.138. If we need to move our items to this freezer follow the procedure outlined below:

1. Affix a label to the outside of the freezer stating which shelf(ves) you are using.
2. Label your materials.
3. Be aware that as the door will be opened continually it will go into alarm, which will be received by the alarm monitoring shop.
4. Please call them BEFORE you start the transfer of materials at 471.3935 to warn them that they needn't therefore call Rob (building manager) at 2.00 in the morning.

Welch Freezer Failure

Preventive maintenance

Try to minimize the amount of time that the freezer door is open; if necessary, remove the rack or box from freezer, close door, find your stuff, and return rack/box to freezer.

Maintenance checklist

To clean lid gasket use a soft cloth to remove any frost build-up from the gasket, sub-lids and lids. Replace and clean lids. To clean lids use warm water to remove ice and allow to dry.

To clean air filter and/or condenser use a vacuum to remove any dust from the filter/condenser fins. Use care not to damage the condenser fins.