Barrick Lab :: ToolsMarkerDivergence

<table><tr><td width=88><img src="%PUBURL%/%WEB%/SharedImages/wip.gif"></td> <td valign="center"><b><font color="red" size=+2>Warning!</font><br><font size="+1">This tool is under active development.  Its capabilities and usage may change without warning, and it has not been adequately tested.</font></b></td></tr></table>

---+ Marker Divergence Experiments

This workflow implements a method for extracting effective beneficial mutation rates (_&mu;_) and selection coefficients (_s_) from marker divergence experiments [[#ReferenceAnchor][&#91;1&#93;]]. This is a way of parameterizing the evolvability of a bacterial strain.

%TOC%

---++ Requirements and Installation

| [[%ATTACHURL%/md_v0_01.tgz][%ICON{download}% Download]] | version 0.01 | 21 September 2008 |

The Perl scripts require the module Math::Random::MT::Auto and its prerequisites for random number generation. They can be installed from [[http://www.cpan.org][CPAN]]. The Math::Random::MT::Auto module has a code component that must be compiled. If you have root access on a  system you can probably install these from the command line as follows:

<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;sudo perl -MCPAN -e shell<br>
&nbsp;&gt;Password: ********<br>
&nbsp;&gt;install Math::Random::MT::Auto<br>
&nbsp;&nbsp;<i>answer yes to any prompts about installing prerequisites</i>
</div></code>

[[http://www.mathworks.com/][MATLAB]] is required for calculating establishment probabilities.

[[http://www.r-project.org/][R]] is required for fitting marker divergence curves. It should be present in your $PATH, so that the Perl scripts can invoke it.

You may want to add the location of the perl scripts to your $PATH. You may need to change the first line of each script to the correct path to your Perl executable if it is not located at:

<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
#!/usr/bin/perl
</div></code>

Help for each individual Perl script can be obtained as follows
<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt; perldoc &lt;script&gt;
</div></code>

---++ 1. Fit &alpha; and &tau; empirical parameters from experimental data

The basic command is:
<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;marker_divergence_fit.pl -i input.tab > output.fit
</div></code>

---+++ Input file data format

The input file is *tab-delimited*. The header row begins with "transfer", and the other columns are labels indicating the name of an experimental time series of marker ratio measurements. Each following row begins with the number of the transfer followed by the marker ratio measurements for that series at that time point. Marker ratios may be given in a variety of formats. Pass the =-m= option followed by =ratio=, =log_ratio=, =log10_ratio= to this script depending on the format of you data values. The default mode is =ratio=.

*Portion of an example marker ratio input file:*
<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
transfer	exp-1&nbsp;	exp-2&nbsp;	exp-3	<br>
0&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;	0.5087	0.5068	0.4990<br>
3&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;	0.5000	0.4844	0.5174<br>
6&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;	0.4853	0.5393	0.5115<br>
9&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;	0.4802	0.4862	0.4522<br>
12&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.4884	0.4431	0.5170<br>
15&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.5277	0.5196	0.5266<br>
18&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.4983	0.4638	0.4607<br>
21&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0.5221	0.5361	0.5000<br>
</div></code>

The output file is tab-delimited, with columns containing data as labeled. 

---+++ Baseline correction

If some of your experimental curves do not start at a 1:1 ratio of the neutral marker states, you will also want to pass the =-b= option followed by the number of initial points (not transfers) . The script corrects for the initial marker imbalance by fitting &tau; and &alpha; to a modified equation that accounts for the fact that for a population diverging toward marker state _A_, where _A_ was initially present in less than 50% of the population, the marker ratio will be shifted sooner than in a population where it was initially present in 50% or more of the population.

*Example:*
<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;marker_divergence_fit.pl -m log_ratio -i input.tab > output.fit
</div></code>
_Corrects for the baseline by taking the average of the first 5 points._

---++ 2. Generate a table of establishment probabilities with MATLAB.

The population genetics model assumes that each new beneficial mutation that is generated has a certain probability of establishing (escaping loss due to dilution) during the serial transfer regime of the experiment. A table of these probabilities must be calculated with the MATLAB script.

First, add the directory containing the two ".m" files that come with the distribution to the MATLAB path.

*In MATLAB:*
<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;&gt;establishment_probability_table(6.64, 5E6, 0.001, 1, 'pr_establishment_T_6.64_No_5E6.tab')
</div></code>

The arguments are the number of generations per transfer, the initial population size immediately after each transfer, the precision of the file to be generated, the maximum selection coefficient to consider, and the output filename. Output is a tab-delimited list of selection coefficient and probability of establishment when a new mutant has this advantage relative to the population average [[#ReferenceAnchor][&#91;2&#93;]].

It is important to allow a maximum selection coefficient value several fold *greater* than the expected effective selection coefficient (_s_) because multiple mutations may occur that give a large benefit relative to the population average. Reasonable values are typically 0.0001 to 0.001 for the precision and 1 to 5 for the maximum. 

A file (=pr_establishment_T_6.64_N_5E6_LT.tab=) is provided with the distribution that can be used for experiments conducted under the conditions of the long-term _E. coli_ evolution experiment.

---++ 3. Simulate and fit idealized marker divergence curves

The next step is to simulate marker divergence curves generated by a simplified population genetics model where there is only one category of beneficial mutation with selection coefficient _s_. These beneficial mutations occur with a rate _&mu;_. Selection coefficients are defined such that w<sub>new</sub>=w<sub>initial</sub> (1+s). This model takes into account the population bottlenecks that occur during a serial transfer evolution experiment.

For each combination of _s_ and _&mu;_, a distribution of the effective parameters &alpha; and &tau is determined from the idealized data. Comparing the effective parameters extracted from the experimental data to all of these distributions allows the maximum likelihood values of _s_ and _&mu;_ that best explain the experimental data to be determined.

---+++ 3.1 Simulate marker divergence data for a set of _&mu;_ and _s_ effective beneficial mutation parameters

<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;marker_divergence_pop_gen_simulation.pl -T 6.64 -N 5E6 -u 1E-8 -s 0.08 -p pr_establishment_T_6.64_No_5E6.tab -k 22 -i 3 -r 100 > pop_gen_s_0.08_u_1E-8.tab
</div></code>

The generations per transfer (=-T=), initial population size at the beginning of each growth cycle (=-N=), per generation mutations rate (=-u=),  per generation selection coefficient (=-s=), file of establishment probabilities produced by MATLAB (=-p=), number of generations during outgrowth (before printing any data) (=-k=), print out marker ratio each time this many transfers pass (=-i=), number of simulation replicates to perform (=-r=).

---+++ 3.2 Fit &alpha; and &tau; empirical parameters from simulated curves

This step is the same as that used to fit the experimental data.

<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;marker_divergence_fit.pl -i 
</div></code>

---+++ 3.3 Automating and parallelizing this step

Generally, many combinations of _&mu;_ and _s_ must be calculated to determine the maximum likelihood effective parameters. This script combines the two previous steps to serially create marker ratio and fit files over a range of these parameters. 

<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;marker_divergence_background_model.pl -T 6.64 -N 5E6 -u -8:-6:0.5 -s 0.06:0.2:0.02 -p pr_establishment_T_6.64_No_5E6.tab -i 1  -r 100 -k 22 
</div></code>

Parameters are the same as in =marker_divergence_pop_gen_simulation.pl=, except =-u= and =-s= are supplied as =start:end:step_size= combinations, and =-u= is in log10 units, i.e. passing a value of -8 gives a mutation rate of 10<sup>-8</sup>.

This procedure can be farmed out to a computer cluster. Consolidate all of the output files into a single directory before proceeding to the next step. 

---++ 4. Determine the maximum likelihood effective parameters

Finally, we determine what values of _&mu;_ and _s_ produce &alpha; and &tau; distributions in the simulated data that are statistically indistinguishable from those fit from the experimental data.

<code><div style="border-color: grey; border-style: solid; border-width: 1px; padding:1px;">
&nbsp;&gt;marker_divergence_significance.pl -i experimental.fit -d path/to/simulation/fits > experimental.sig
</div></code>

The output file =experimental.sig= has starred lines where the experimental data and simulations agree. Since &alpha; and &tau; are not independent, this represents a _greater than_ 95% confidence cloud.

---++ References
#ReferenceAnchor
   1 Hegreness, M., Shoresh, N., Hartl, D., and Kishony, R. (2006) An equivalence principle for the incorporation of favorable mutations in asexual populations. _Science_ *311*, 1615-1617.
   1 Wahl, L.M., and Gerrish, P.J. (2001) The probability that beneficial mutations are lost in populations with periodic bottlenecks. _Evolution_ *55*, 2606-2610.

---++ Acknowledgments
Many thanks to Noam Shoresh for extensive discussions that made it possible for me to reproduce his methods and for providing his raw data to check the results from these tools.
Attachments
Topic attachments
I	Attachment	History	Action	Size	Date	Who	Comment
tgz	md_v0_01.tgz	r1	manage	441.1 K	2008-09-21 - 16:58	JeffreyBarrick
This topic: Lab > ToolList > ToolsMarkerDivergence
Topic revision: r8 - 2008-09-22 - JeffreyBarrick