How to clean glassware

50 ml flasks

The 50ml flasks are used in many experiments and need to be cleaned and sterilized on a regular basis. The procedure is as follows:

  • 1. Autoclave used flasks (including lids and the trays) on liquid cycle for 1 hour.
  • 2. After autoclaving, the lids are removed and rinsed thoroughly with DI water. The lids can then be placed in secondary container (usually the large autoclave tray) and allowed to air dry.
  • 3. The contents of the flasks are dumped down the drain and the flasks are rinsed a few times with DI water and placed in dishpan.
  • 4. The flasks are then put into dishwasher on 2nd floor and washed using cycle 7. This takes about 45 minutes.
  • 5. After washing the flasks are placed into the stainless steel trays. Place the dry lids back onto the flasks. Place a new strip of autoclave tape on the tray.
  • 6. The clean flasks are now ready for sterilization. Autoclave on gravity cycle for 45 or 60 minutes.

Test tubes

  • 1. Remove and rinse lids with DI water. Place lids in secondary container to dry.
  • 2. Add beach to each test tube and allow to sit for about 15 – 30 minutes (depending on volume of solution).
  • 3. Dump contents of test tube and place empty tube into broken glass box.
Edit | Attach | Watch | Print version | History: r4 < r3 < r2 < r1 | Backlinks | Raw View | More topic actions...

 Barrick Lab  >  ProtocolList  >  GlasswareCleaning

Contributors to this topic Edit topic CraigBarnhart, JeffreyBarrick, DanielDeatherage
Topic revision: r1 - 2011-09-26 - 19:32:05 - Main.CraigBarnhart
 
This site is powered by the TWiki collaboration platform Powered by Perl This site is powered by the TWiki collaboration platformCopyright ©2024 Barrick Lab contributing authors. Ideas, requests, problems? Send feedback