Setting up the BEACON Teleconference in GDC 7.808

  1. Plug the television into the wall. (!!!)
  2. Press the power button on the touchpad. It will take about 3 minutes to fully come on.
  3. Press Favorites > BEACON teleconference on the touchpad.
  4. Press the button touchpad to bring up the numeric keypad and type in 9# (matching the code by BEACON on the screen).

Controls

  • Volume is on the side of the touchpad.
  • On the microphone: RED means you are muted, GREEN means the microphone is ON.


This topic: Lab > WebLeftBar > ComputationList > BEACONTeleconferenceSetup
Topic revision: r2 - 12 Jun 2015 - 20:53:49 - Main.JeffreyBarrick